· Input Voltage Range: 1.1V to 6.5V
· Two Output Voltage Modes 0.5V to 5.5V (Set by Resistive Divider) 0.5V to 3.65V (Set VOUT Select Pin, No External Resistor Required)
· Accurate Output Voltage Accuracy (±1%) Over Line, Load and Temperature
· Ultra-high PSRR: 30dB at 500kHz
· Excellent Noise Immunity: 8μVRMS at 0.5V Output 13μVRMS at 3.3V Output
· Ultra Low Dropout Voltage: 180mV at 3A
· Enable Control
· Programmable Soft-Start Output
· Stable with 10μF or larger Output Ceramic Capacitor
· Support Power-Good Indicator Function
· RoHS Compliant and Halogen Free
The TMI6013 is a high output current (3A), ultralow noise, high accuracy, low dropout liꦆnear regul🧜atorඣ (LDO), and is capable of sourcing 3A with extremely low dropout. ♐The device output voltage can be set by꧅ pin-selectable (up to 3.65V) using a P༺CB layout with𒉰out the need of external resistors, ✨thus reducing overall component count, meanwhile, the device can be set with higher🎀 output voওltage by external resistor di🐼vider. The device support🤪s single input supply𝓡 voltage as low as 1.1V that makes it easy to use. The 🍒low noise, high PSRR, and high output current capability make the TMI6013 ideal to power noisesensitive devices such as an🥂alog-to-digital converter🍨s (ADCs), digital-to-analog converte🧸rs (DACs), and RF components. To red🔴uce inrush current with very high accuracy, remote sen๊sing, &nb❀sp;and softꦅ-start capabilit🐈ies, the TMI6013 is ideal for powering digital loads such as FPGAs, DSPs, and &♎nbsp;ASICs. The device is offeredℱ in a QFN3.5x3.5-20 package.
在线订购 
电源管理芯片
电机驱动芯片
接口控制芯片
音频功放
消费电子