·Supports USB DCP Shorting D+ Line to D– Line per &nb🍒sp;USB Battery Charging Specification, Revision 1.2 (BC1.2)
·Supports Shorted Mode (Shorting D+ ওLine to D-Line) per Chinese Telecommunication Industry Standard YD/T 1591-2009
·Supports USB DCP Applying 2.7V on D+ Line and 𒉰;2.7V on D- line
·S൩upports USB DCP Applying 1.2V on D+ and D– Lines
·📖Automatically Switch D𒊎+ and D- Lines Connections for an Attached Device
·Single USB Port Controller (TMI9130D)
·Dual USB Port Controller (TMI9130C)
·Operating Range: 4.5V to 5.5V
·Available in SOT23-6 Packag
The TMI9130C and TMI9130D devic♌es are USB dedicated charging port (DCP) controllers. An autodetect feature monitors USB data line voltage, and automatically provides the correct elec𓆏trical signatures on the data lines to charge compliant devices among the following dedicated charging schemes:
1. Divider 3 DCP, required to apply 2.7V and 2.7V on the D+ and D– Lines respectively (TMI9130C, TMIও9130D)
2. BC1🅰.2 DCP, required ♔to short the D+ Line to the D– Line
🧸3. Chinese Telecom Stanꦆdard YD/T 1591-2009 Shorted Mode, required to short the D+ Line to the D– Line
4. 1.2V on both D+ and D– Lines
在线订购 
电源管理芯片
电机驱动芯片
接口控制芯片
音频功放
消费电子