·USB Type-C Downstream Facing Port(DFP)
·Type-C supports PD2.൩0, PD3.0 inclu🀅ding PPS (TID:6809)
·Type-C supports BC1.2, Apple2.4A,QCꦕ2.0/QC3.0/ QC4.0/QC4.0+
·Type-A supp𝓰orts BC1.2, Apple2.4A,QC2.0/QC3.0, SCP,FCP, AFC, 💮Super charging-V
·Intelligent power distribution
·Integrate🃏d VCONN power and switch for e🍌-Marker cable detection
·Built-in shunt regulator for constant voltage and constant current contr🍨ol
·Built-in MCU and flash controller
·Programmable cable compensation
·Built-in discharge MOS
·Driver for NMOS load switch
·Power saving in standby mode
·PDO selection by external resistor
·External thermal protection with NTC
·Protection: OVP/UVP/OCP/OTP etc.
·Package: QFN-32, 4mm×4mm
The IM2403 is a highly integrated USB A+C quick-charge controller that supports PD3.0 /PPS/QC4.0+/QC4/QC3.0/QC2.🍒0 and other fast charging protocol. It is design for USB DFP (Source) charging applications such as power adapters, car chargers and etc. The IM2403 built-in high-precision DACs and shunt regulators to provide high-precision output for type-C and type-A. It minimizes external components and saves BOM cost by integrating BMC PHY, Type-C detection, voltage and current monitors, output bleeding circuit, load-switch NMOS gate driver and system ESD design. When 1A1C connector plug into simultaneously, Type-C or Type-A can keep their own fast charging and power distribution is also realized. The IM2403 also provides comprehensive protections such as over voltage protection (OVP), under voltage protection (UVP), o🌊ver temperature protection (OTP), over current protection (OCP) etc. The IM2403 is available in QFN32 package.
在线订购 
电源管理芯片
电机驱动芯片
接口控制芯片
音频功放
消费电子